Welcome to the 3S Signs website. We have been supplying signs and vehicle livery to Shropshire for over 25 years now from our Factory in Hortonwood, Telford. Listed below are a few of the products you can find at our premises. If there is anything you cannot find just call us on 01952 677506 or pop down to see us. We can talk you through the options available and show you some of the many samples we have here.
Factory and Shop Signage
We have over the years produced 1000's of Shop and Factory signs in the area. Ranging from small wooden plagues to Huge illuminated perspex fascia panels. We have our own vans and fitting crew, so we can advise you right the way through from concept to completion. The Following is a list of the various substrates that can be used to sign your premises
Vehicle Livery
We produce all types of vehicle livery from 1off vans to large corporate fleet graphics. Our team of vinyl fitters will be able to transform your vehicle into a mobile advertisment that will be seen 24/7.
Vehicle wraps are fast becoming a popular way to maximise your prescence to potential customers. We can help you with design and advise on the best use of a wide variety of substrates. All work is done in our fitting bay at the factory so you can be certain of a professional finish.
Full Colour Digitally Printed Magnetic Signs
Magnetic vehicle signs are digitally printed onto a permanent vinyl and coated with a
protective clear film, then applied onto premium magnetic sheets.
We only use premium 0.8mm magnetic material for car magnets.
We can manufacture magnetic signs to almost any size requirement up to 600mm high.
Standard size for most car magnets is 590mm x 270mm.
We can also cut to custom shapes and sizes using a die cutting knife
Application and care guide:
Always store magnetic signs flat, the side of a filing cabinet is ideal. Clean the vehicle thoroughly before applying the sign. Make sure that you only apply the sign to flat panels.
When you wash your car wash the bonnet first, then wash the sides and the face of the
magnetic sign, remove the sign and lay upside down on the bonnet. Wash the back of
the sign and continue to wash where the sign was removed from and then continue to
wash the rest of the vehicle.
When the back of the sign and the panel is dry replace the sign. It is also a good idea to
place a small amount of baby powder on the back of the sign before applying it to your car.
Screen printing onto magnetic material
We can also screen print spot colours onto the magnet material. This process is ideal for
larger quantities such as fleets of cars or POS retail display.
Please contact us for a quotation - no minimum quantity
